Showing posts with label modern briar pipes. Show all posts
Showing posts with label modern briar pipes. Show all posts

Wednesday, April 20, 2011

Fixing a lose stem or a tight stem in a briar Pipe

Once in a blue moon a pipe smoker may be faced with a loose stem. Most of the time this problem will fix itself, but if the stem is so loose that it falls out, then something has to be done. Your best bet is to take the pipe to a tobacconist or send it to a repair person. These people will have years of practice doing these repairs, and it will cost very little. It is very easy for an amateur to crack a shank when attempting to repair a pipe, as most of us, at one time or another will agree to that.

Nevertheless, if you are determined to do it on your own, first you have to determine what kind of stem is in the pipe. If the stem is Lucite, the easiest fix is to apply a very thin layer of clear nail polish to the tenon, allow this to dry *completely*, and then carefully sand the tenon to fit. A vulcanite stem, on the other hand, is a bit more complicated, as you will need to heat the tenon and expand it in some way. There are a number of ways to go about this procedure, but the best one is found below.

First, remove the stem from the pipe and insert a drill bit, using the end that fits into the chuck and try it for size. If it fits snugly into the tenon, the next size up is the one you will be using.

Next, carefully
heat the tenon over the flame (1/2 inch to 1 inch away) of a disposable lighter for a couple of minutes, rotate the tenon back and forth while moving the flame up and down (the intent is to soften the vulcanite, not melt it).

Then take the drill bit and insert the end that goes into the chuck into the tenon. Push it in about 1/2 inch, be very careful to keep the tenon straight.

Then while holding the pipe and bit with both hands, put it under cold water to cool down. Pull the bit out and clean it.



Fixing a stem that's too tight
If the stem is still inserted in the pipe and is so difficult to remove that you fear your pipe may be damaged, then place the pipe in the freezer for several minutes. This works the vast majority of the time; however, if the stem still proves too difficult to remove, smoke the pipe, allow it to cool, and try to remove the stem again. If neither of these techniques work, then send the pipe to a reputable repair person.

If you do manage to remove the stem, place some sort of dry lubricant, such as graphite (from a soft pencil) or wax, on the tenon and attempt to reinsert the stem. If this does not provide satisfactory results, you will need to remove a small amount of material from the tenon. Wrap some very fine (400 grit or so) sandpaper or some "O" or finer grade steel wool around the tenon and twist the stem gently. Work very slowly and carefully, and check the fit frequently until it is satisfactory.

Wednesday, March 23, 2011

The 21st Century Pipe Smokers


Smoking a pipe has always been rather romantic for someone who is starting. Many do it as they revisit their memories of a favorite uncle or grandfather. Today many who start young, are starting in College. They don’t come from any specific group. Some are artists, other mathematicians, some are getting degrees in weather science and others will become teachers.

Over 90% are men; women will occasionally become puffers, but not like men. Cigars go down the same road. It seems the taste is not something women like too much.

I’ve seen cigar smokers who switched over to pipes because of the cost of cigars.

I’ve seen cigarette smokers who switched over because of the cost of cigarettes.

I’ve even asked why they started… Because of my uncle, father, grandfather, great grandfather…etc. Because, “I look cool”, “intelligent”, “because it commands respect”.

“Because no one complains of pipe smoking.” That was different!

In fact, certain pipe tobaccos; the aromatics and certain mild English, have aromas that are true head turners. Fruity, nutty, sugary, chocolaty… It elicits memories, warm memories, some from childhood, some from a mentoring teacher or a favorite movie. Yes, a movie! Old Black and white movies always have someone smoking a pipe or lighting up a cigar. “it’s a wonderful life” with Jimmy Stuart, has a great scene at a Barbershop, with an old lighter.

Its also noticeable that a definite increase of College students and young professionals are looking to add a pipe to the baggy pants, tats and piercing. I haven’t seen anyone tracking the number of new young smokers, but sales from pipe tobacco and briar pipes are definitely on the rise.

We will find the 21st century young pipe smokers with a pipe in one hand and an iphone on the other. Or a pipe held tightly between their teeth as they struggle through a “Prince of Persia” or “Avatar” video game.

Even though the pipe has its origins over 2000 years ago if not more, it has adapted to the times, culture and technology. Even though we can buy pipes entirely made by hand, (these are pieces of art), there are many brands where the smoker can get an excellent pipe made partially by machine and finished by hand or entirely made by machine and smokes amazingly well. As long as the briar is of good quality a fairly well made pipe is a keeper.

Today there are attempts to make pipes out of metal, plastic, glass and who knows what else…many people have tried to reinvent the pipe…but since the advent of the briarwood, there is no other material, except for meerschaum that will produce a decent smoke with any type of tobacco; from Aromatics to heavy English.


I wonder, as I fill my pipe with a new batch of Cherry-Chocolate tobacco…will the pipe smoker of the future look like a Will Robinson in a silver space suit sitting outside his home after a full day trying to catch a comet? Hmmmm….. Sounds fun….